MAJORITY K2 - Sound Bar with Subwoofer Manual

Controls And Functions

Side View + Back View

1. Power
2. Mode
3. Volume +/Next
4. Volume-/Previous
5. Line In
6. USB Function

7. HDMI ARC Input
8. Subwoofer Output
9. FM Antenna
10. Optical Input
11. DC Power Input
12. Wall Bracket

Remote Control

13. Power On/Off
14. Volume +
15. Back step: Use in AUX or Bluetooth mode to go back a track
16. Play/Pause
17. Volume -
18. Bass increase
19. EQ: Press the button to adjust the equaliser Press and hold the button to turn the soundbar LED light on and off. EQ settings can be changed in any play mode
20. Bass decrease
21. Mode: Switch between modes
22. Forward step: Use in AUX or Bluetooth mode to go forward a track
23. Treble increase
24. Treble decrease

25. DC adapter input
26. Power Switch

What's In The Box?

Box Contents

27. Majority K2 Soundbar
28. Subwoofer
29. Remote Control
30. 35mm to 35mm Audio Cable
31. RCA Cable
32. HDMI Cable
33. Power Adapter x 2

Wall Mounting and Auto-Power Off

Wall Mounting

The Majority K2 can be mounted to a wall using the appropriate fittings for your wall type by using the wall mounting brackets positioned at the rear of the unit. As these differ between wall types the fittings are not included. To wall mount the K2 soundbar, the appropriate fittings for your application will need to be sourced Auto power off function

Automatic Power Off Mode

The Majority K2 Soundbar will automatically go into sleep mode after 180 minutes if the TV is off.

Using the RCA Audio Cable

Connect the RCA Stereo Audio Cable to connect the TV's stereo RCA (L/R) audio output socket.

Connect the audio output cable to the side of the soundbar via the 'LINE IN' input sockets (Ref.5).

Then press MODE on the remote control (Ref.21) or on the unit (Ref.2) to select LINE mode.

Troubleshooting: If you are not receiving a picture, please ensure that the RCA cable is connected to 'output' RCA ports on your TV

If your TV does not have 'output' RCA ports, please use an alternative connection method

Using the ARC Input

You will need: an audio source with an ARC audio output and an HDMI ARC cable (included).

Connect the ARC audio cable from the ARC input on the soundbar (Ref.7) to the ARC output on your audio source.

Switch on the soundbar
Press the MODE button on the remote control (Ref.21) or on the unit (Ref.2) until ARC mode is selected.

Using the native controls on your connected device, ensure the audio settings are set to ARC or HDMI Audio

Using the Optical Input

You will need: An audio source with an Optical Audio Output and a Digital Optical Audio cable (not included).

Connect the Optical cable from the soundbar (Ref.10) to your audio source

Switch on the soundbar. Press the MODE button on the remote control (Ref.21) or on the unit (Ref.2) until OPTICAL mode is selected.

How do I set the correct Audio settings for Optical mode?
When using the soundbar in Optical mode, or when using the soundbar with an App such as Netflix or Amazon Prime, you may experience sound issues if you have your audio settings set up incorrectly Using the native controls on your connected device, make sure the audio settings are set to PCM or Optical Audio

This setting can be found within your TV's sound settings, most likely under 'Additional Settings' within the Sound menu, where you will find options for 'PCM/Dolby Digital/DTS/DTS Neo 2:5'.

Using the MP3 LINK Connection (Line In)

Plug one end of a 3.5mm audio input cable (included) into the Line In input on the unit (Ref.5). Before use, disconnect any cables connected to the Stereo RCA Inputs

Plug the other end of the cable into the audio output/headphone output on your audio source

Switch on the soundbar

Press the Mode button repeatedly on the soundbar (Ref.2) or on the remote control (Ref.21) until LINE in mode is selected.

Connecting to the Mains Supply

Ensure that the power supply voltage is within the range of 100V~240V. Any other voltage may cause damage to the unit

Unwind the mains cable to its full length Connect the mains plug to a mains socket Make sure the mains plug is fully inserted into the mains socket

Connect the adapter to the unit via the DC input Socket (Ref.11).

Ensure all audio connections of the unit are connected before connecting to the mains power socket

Unplug the power cord from the outlet when the unit is use for an extended period of time.

Connecting the Soundbar and Subwoofer

Please note: The soundbar and subwoofer must be within a 10 metre range of each other in order to be successfully connected.

The sub-woofer and soundbar will wirelessly connect to each other for a surround sound experience. This allows you to place the sub-woofer within the corner of the room to ensure that the sound from your TV fills the room.

To connect them together, please ensure that your soundbar is being mains powered and switched 'ON' for initial set up. To do this, press the Power button (Ref.1) on the unit or the POWER button on the remote control (Ref.13).

Follow by plugging the subwoofer into a power source, and turning it ON via the power switch (Ref.26)

The sub-woofer and soundbar should then automatically connect via wireless Bluetooth connectivity

If you are having connectivity issues, please move the sub-woofer closer to the soundbar for set up

Bluetooth Operation

Pairing a Bluetooth Device for the First Time
Press the POWER button on the unit (Ref.1) or the POWER button on the remote control (Ref.13) to switch on the unit.

Select and press the MODE button repeatedly on the remote control until in Bluetooth mode (Ref.21) or press the Mode button (Ref.2) repeatedly on the soundbar to enter Bluetooth mode

Using the native controls on your Bluetooth device, select the "Majority Ben Nevis II+" in your Bluetooth settings to pair.

If your device requests a password, enter the default "0000". Refer to the user manual for your specific device for instructions on pairing and connecting Bluetooth devices

When successfully paired and connected, a beep will issue from the unit. After initial pairing, the unit will stay paired unless unpaired manually by the user

If your device should become unpaired or you find it is unable to connect, repeat the above steps.

FM Mode

Press the MODE button on the remote control (Ref.21) or on the soundbar (Ref.2) until FM mode is selected.

Ensure that the wire aerial on the back panel of the soundbar is extended.

In FM mode, press and hold the 'Play/Pause' button on the remote (Ref.16) to begin searching for available FM stations.

After the search is complete, the soundbar will save the stations with good signal. To scroll through these saved stations, use the 'Previous/ Next' buttons on the remote control (Ref.15/Ref.22).

Please note:
If you are having trouble with receiving stations, complete another autoscan and adjust the aerial if required

Troubleshooting

If you encounter an issue with your soundbar, please refer to the following checklist

Specification

Support
If you require further assistance with your new soundbar, please contact our support team on the Majority website: www.majority.co.uk/support

Warranty
All products come with a standard 12 month warranty All items must be registered on www.majority.co.uk for the warranty to be valid Once on the web page, use the menu to find "Register Your Product". You will also be given the chance to extend your warranty for an additional 24 months, free of charge.

Safety Information

1. Read these instructions
2. Keep these instructions. Instructions are also available for download at www.majorityradios.co.uk
3. Heed all warnings
4. Follow all instructions
5. Do no clean the apparatus near or with water
6. Do not block any ventilation openings Install in accordance with the manufacturer's instructions
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
8. Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
9. Only use attachments/accessories specified by the manufacturer
10. Unplug this apparatus during light storms or when unused for long periods of time
11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally or has been dropped
12. No naked flame sources, such as lit candles, should be placed on the apparatus
13. Dispose of used electrical products and batteries safely according to your local authority and regulations

ADDITIONAL WARNINGS
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be places on the apparatus. Main plug is used to disconnect device and it should remain readily operable during intended use In order to disconnect the apparatus from the main mains completely, the mains plug should be disconnected from the main socket outlet completely Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Please read all instructions carefully before use and keep for future reference

Risk of electric shock
Do not open

Read all instructions carefully before use and keep for future reference
When servicing, use only identical replacement parts