Auto Upgrade - Night Owl C80XFR Series User Manual

7.6.4 Auto Upgrade

Control settings for auto upgrades of the DVR firmware.
Upgrade from USB: Upgrade the DVR firmware from a USB flash drive. To upgrade DVR firmware,
insert a USB flash drive containing the DVR upgrade file into the USB port on the back of your
DVR. Then select the correct file from the "Upgrade File" drop-down menu and select "Upgrade."
Auto Upgrade: Enable or Disable the auto upgrade feature. Firmware updates are detected automatically
when this feature is enabled. The default selection for the auto upgrade feature is "Enable."
Check For Updates: Click on "Check" button to manually check for updated firmware versions. If
an upgrade is detected, click "OK" on the pop-up window to download and install the new version.
Camera Upgrade: To upgrade camera firmware, insert a USB flash drive containing the camera
upgrade file into the USB port on the back of your DVR. Then select the correct file from the
"Upgrade File" drop-down menu and select "Upgrade."
85