Date And Time Setup - Night Owl C80XFR Series User Manual

NOTE: Forgot the admin password? Click the "Forgot PWD?" tab in the Startup Wizard and a Secure Code will be sent to your
recovery email address. Enter the Secure Code when prompted, then create a new password for the DVR. Your DVR MUST be
connected to the Internet to receive the secure code.
If the DVR is not connected to the Internet, the Secure Code can't be sent to your recovery email address. In
this case, the screen below appears, please follow the instructions to contact Tech Support, and an agent can
assist you in creating a new password for your DVR.

6.1.5 Date and Time Setup

The Date and Time Setup screen of the Startup Wizard allows you to set the current date and time. You may
choose to use Network Time Protocol (NTP) to auto-configure the current date and time.
NOTE: In order to use Network Time Protocol (NTP), your DVR must be connected to the Internet.
29