Auto Upgrade - Night Owl CM-IH8-BA User Manual

7.6.3 Auto Upgrade

Control settings for auto upgrades of the NVR software.
NOTE: In order for your NVR to check for system upgrades, your device must be connected to the Intenet.
Auto Upgrade: Enable or Disable the auto upgrade feature. Firmware updates will be detected automatically
when this feature is enabled. Night Owl strongly suggests that the Auto Upgrade feature remains enabled.
Check For Updates: Check this tick box to periodically check for updated software versions.
Detect: Prompt your NVR to check for System Upgrades.
USB Update: Update the NVR firmware from a USB Flash Drive connected to the NVR containing a
firmware upgrade file.
76