6.2.2 Live View (All Channels)
Live View is the default screen you see when viewing all channels on your DVR. You can customize the Live
View by selecting a Quad, Eight, or Nine channel configuration. In Quad and Nine view mode, double clicking
on a channel displays the camera image in full screen; double click the full screen channel to revert to multiple
channel view. In Eight view mode, double click on a channel to display in the larger screen within the Eight
view screen; double clicking the larger screen turns that channel into full screen view. Double click again to
revert to Eight view mode.
CAM01
B
Date and Time: Current date and time of the system.
A
Channel Name: On screen display of channel name.
B
DVR Status Recording Icon: Indicates that your DVR is currently recording video from this camera.
C
This icon is the same whether the recording was scheduled, initiated manually or triggered by motion.
Speaker Icon: Allows you to enable or disable audio streamed from an audio enabled camera.
D
Motion Detection Icon: Indicates that an alarm event such as motion detection, video loss or tampering
E
has occurred.
Refresh Icon: Auto detection of camera formatting. By double clicking on this icon, you can change the
F
format from CVI to AHD to TVI. This would allow the DVR to have different types of cameras connected
at once.
Question Mark: Shown when there is no signal to that particular channel.
G
Video Loss Icon: Indicates that the specific channel has lost the feed from the corresponding camera.
H
This may be caused by a disconnected/damaged cable, the camera may have lost power or the camera
may have been de-registered from the channel. This also appears if you do not have a camera connected
to the channel.
Human Detection Icon: Indicates that an alarm event due to human activity has taken place.
I
Night Owl Logo: Indicates that the coaxial transmission protocols are operating.
J
Facial Recognition Icon: Indicates that an alarm event due to human activity has taken place.
K
C
D
E
F
I
K
J
G
41
A
H