Power; Standard Camera Power - Night Owl C80XFR Series User Manual

4.2 Power

4.2.1 Standard Camera Power

Locate an included power splitter.
1
Connect the power splitter to the remaining DC power connectors (red) of the cables.
2
Plug the power splitter into the labeled camera power supply, then plug the camera power supply
3
into an available wall outlet or UPS. Keep in mind, Night Owl always recommends utilizing a surge
protector to minimize the risk of damage caused to your DVR in the event of a power surge.
Cameras
Make sure all cameras are working prior to mounting by connecting them as described in the
section above. Once all cameras are confirmed to be fully operational, you can run the cables and
mount the cameras at their final locations.
Power Splitter
Power
Splitter Power Adapter
Camera Plug into surge protector
17