Place tank on level surface resting at
angle shown. (Fig. 2)
Remove FUEL CAP. Use a funnel or
suitable lling device and ll with
clean, fresh fuel.
Replace FUEL CAP on tank and
on fuel container. Tighten rmly.
WIPE UP ANY SPILLED FUEL AND
DISPOSE OF IN A SAFE PLACE.
Pumping
Be sure FUEL VALVE is OFF
(Fig. 4) and FUEL CAP is rmly
closed (Fig. 5).
Open PUMP KNOB one full turn.
(Fig. 6)
Fig. 2
Place thumb over hole in pump knob
and pump approximately 30 full
strokes. (Fig. 7)
Close PUMP KNOB. (Fig. 8)
Fig. 3
Leak Check
Make sure FUEL VALVE is fully
"OFF".
CHECK FOR LEAKS in one or more
ways. Look for fuel mist or a wet
appearance of fuel on surfaces.
Listen for hiss of escaping gas. Smell
for fuel odor. Never use a ame. Do
not use if leaking. (Fig. 9)
Fig. 4
CHECK
LEAKS
Fig. 5
English-4
CHECK
FOR
FOR
LEAKS
Fig. 6
Fig. 7
Fig. 8
CHECK
FOR
LEAKS
Fig. 9