Lighting Main Burner - Coleman Dual Fuel 428 Instructions For Use Manual

Installing Tank
Insert GENERATOR into large hole
on front of stove and into mixing
chamber above burner. Engage
TANK CLIPS into slots on front of
stove. (Fig. 10)
Swing WIND BAFFLES out and insert
the WIRE CLIPS into slots in ends of
stove. (Fig. 11)

Lighting Main Burner

WARNING
• Perform leak test outdoors.
• Extinguish all open ames.
• NEVER leak test when smoking.
• Do not use the outdoor stove until connection
has been leak tested and does not leak.
WARNING
• BURN HAZARD
• Never leave stove unattended
when hot or in use.
• Keep out of reach of
NEVER FILL OR LIGHT STOVE
INSIDE HOUSE, CAMPER, OR TENT
Fig. 10
Fig. 11
children.
.
English-5
Close AUXILIARY VALVE (OR
VALVES). Turn LIGHTING LEVER to
(Fig. 12 & 13)
UP position.
Fig. 12
STANDARD VERSION STOVE:
Hold lit match at MAIN BURNER
before opening the FUEL VALVE.
Open FUEL VALVE quickly, at least
two full turns. (Fig. 14)
ELECTRONIC IGNITION
VERSION STOVE:
Quickly open FUEL VALVE two full
turns while rotating IGNITOR KNOB
clockwise until stove lights. (Fig. 15)
CAUTION
A persistent high, yellow ame indi-
cates ooding or a leak. Close fuel
valve, let ames burn out and stove
cool. Turn stove upside down to
empty any fuel from burner and wipe
dry. Review instructions and relight
stove.
Fig. 13
Fig. 14
Fig. 15