Maintenance - W&H MS Instructions For Use Manual

7. Maintenance

Before carrying out any maintenance on the sterilizer, switch the unit OFF and remove the mains cable.
Wear personal protective equipment (gloves, goggles, etc.) during normal use of the sterilizer and when carrying out
cleaning and maintenance tasks.
Before accessing the chamber and the connected parts, be sure that the sterilizer is cold.
Follow the instructions in this chapter when carrying out any maintenance on the sterilizer.
Maintenance program
The maintenance program is outlined in the table on the next page.
It includes the replacement of certain wearing parts (consumables) which is imperative to ensure the safe and faultless operation of
the sterilizer.
Maintenance counters
The sterilizer keeps track of the age of consumables by keeping memory of the number of cycles
executed since the last replacement.
When one counter reaches the maximum, a replacement message appears on the screen and the
consumable needs to be replaced; replace the consumable.
The arrow pointing to the general warning icon tells you that there is a message to be read.
38