Parts Description - Makita CL003G Instruction Manual

PARTS DESCRIPTION

1
Fig.6
1 250 mL (0.07 gal.) dust
case
5 HEPA filter (Filter frame
in white color) (Optional
accessory)
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
NOTICE:
Make sure all the attachments and com-
ponents are secured in place properly before use.
Installing and removing cleaner attachments
CAUTION:
After installing attachments, check if
they are securely installed. If the attachments are installed
imperfectly, they may come off and cause personal injury.
CAUTION:
Be careful not to hit your hand on
the wall etc. when removing the attachments.
When using attachment with lock function
To install attachment, insert it to the suction inlet of the cleaner
until it clicks. Make sure that the attachment is locked.
2 3
Fig.7
► 1. Suction inlet 2. Attachment with lock function 3. Hook
2
3
2 Mesh filter
6 Sponge sheet
1
4
5
3 Cyclone body
7 Cleaner body
NOTICE:
When installing the attachment with
lock function, be sure to align the release button
on the cleaner with the hook on the attachment. If
they are not aligned, the attachment will not be locked
and may come off from the cleaner.
To remove attachment, pull it off the cleaner while
pressing and holding the arms of the release button.
1
Fig.8
► 1 . Release button 2. Arm of release button
3. Attachment with lock function 4. Suction inlet
8 ENGLISH
7 8
6
4 High performance filter
(Filter frame in gray color)
(Optional accessory)
8 Hand strap (Country
specific)
4
2
3