Table of Contents
Advertisement
Setting the handset
Permit/prevent internal listening in
(only on a CAT-iq router)
If the function is enabled, an internal party can listen in to an external call and take part in the
conversation (conference).
Settings
select connection
Show system and line statuses
(only on a CAT-iq base, V2.1 and later)
Showing the system status
Settings
System
OK . . . The System Status is shown (OK or Error)
When there is a system error, show information on the fault cause:
Show line status
Settings
Line
OK . . . The following status information is shown: Line Status, Line State, Call
Divert
Show more information (dependent on status):
Example: Line Status = Error, Details shows additional information on the type of fault
Status details are only updated when the relevant menu is accessed. If the status
changes during the display, the data is not updated.
Show status messages in idle display
Settings
Diagnostic
Line
Select On or Off
If a status display is enabled, relevant messages are shown in the idle
display. If there is more than one active message, the one with the
highest priority is shown, e.g. System error or Line error before Call
Divert active.
60
OK
Telephony
OK
Listening In
OK
Telephony
OK
Telephony
OK
Telephony
OK
Notifications
Save
Availability and operation of the functions
may differ on your telephone.
OK
Connections
OK
Change (
OK
Diagnostic
Details
OK
Diagnostic
Details
OK
OK
System /
OK
= activated)
OK
OK
Example
10:45
INT 1
3rd Aug
Call Divert
active
Calls
Calendar
Advertisement
Table of Contents
