Stop Function; Recall Function - Kuppersbusch IKT804 Instructions For Use And Installation

Operation

4.14 Stop function

The cooking process can be briefl y interrupted with the
STOP function, e.g. if the doorbell rings. The STOP func-
tion must be released in order to continue cooking at the
same power level. If a timer has been set it will pause and
will then continue.
This function is only available for 10 minutes for reasons of
safety. The hob will then be switched off .
1. Pots and pans are on the cooking zones and the requi-
red power levels have been set.
The symbol
2. Press the Stop key
settings, the interval sign
The symbol
been activated.
3. The interruption is ended by fi rstly pressing the STOP
key and then pressing any other key (except the
ON/OFF key).
The second key must be pressed within 10 seconds as
the hob will otherwise be switched off .

4.15 Recall function

(recovery function)
The most recent setting can be recovered if the hob is
switched off unintentionally.
The recall function only works if at least one cooking zone
is switched on.
1. The hob is inadvertently turned off by the ON/OFF key
of the hob
2. Within 6 seconds after turning it off , press the ON/OFF
key of the hob
blink. The STOP key
afterwards.
The original cooking levels are restored. The cooking
process continues.
What can be restored:
• Cooking levels of all cooking zones
• Minutes and seconds of programmed timer functions
• Automatic boost function
• Power boost
Not to be restored:
• Operation time limit (it is counted from 0).
will light up.
. Instead of the selected power
will light up.
will blink because the function has
.
again. The stop key symbol
must be pressed immediately
GB
will
31