Ducati MULTISTRADA V4 2014 Owner's Manual page 37

Below the stopwatch is the current lap number. It is
possible to record maximum 30 laps.
Once the function is activated, flash button
(10, Fig 3) must be used to start/stop the stopwatch:
the first time the flash button is pressed, the
stopwatch flashes for a few seconds.
Each time the flash button is pressed again, the
stopwatch displays the time of the just finished lap
for a few seconds, after which it returns to the
current LAP time.
When the thirtieth lap is reached, "FULL" is
displayed and it is not possible to proceed with the
Fig 28
time recording.
The recorded lap times can be consulted and deleted
using the "Lap" function in the Setting menu.
If a lap recording is interrupted, the stopwatch will
start from zero and the time will not be recorded.
Press and hold the joystick in the DOWN position
for a long time to switch to the trip info menu
selection while keeping the Lap window active. In
this case you can go back to the Lap window by
pressing and holding the joystick in the UP
position for a long time.
Press and hold the joystick in the LH position for a
Fig 29
long time, the instrument panel will return to the
37