Care And Maintenance; Replacing The Ear Pads - Sennheiser RS 120-W Instruction Manual

Care and maintenance

20 | RS 120-W
Care and maintenance
NOTE
Short circuit due to liquids!
Liquids entering the housing of the product can cause a short-circuit
and damage the electronics.
▷
Keep all liquids far away from the product.
▷
Do not use any solvents or cleansing agents.
▷
Switch off your wireless headphone system and disconnect the
transmitter from the wall socket before cleaning.
▷
Clean the headphones and the transmitter only with a soft, dry
cloth.
▷
Clean the contacts on the headphones and the transmitter from
time to time using e.g. a cotton swab.

Replacing the ear pads

For reasons of hygiene, you should replace the ear pads from time to
time. Spare ear pads are available on the RS 120-W product page at
www.sennheiser-hearing.com/rs-120-w.
1. Lightly twist the ear pads counterclockwise until you overcome a
slight resistance.
2. Lift the ear pads off the ear cups and dispose of them properly.
3. Hook the new ear pads onto the ear cups. Observe the
R (right) markings on the rear of the ear pads.
4. Twist the ear pads clockwise until you hear a click sound.
1.
3.
R
2.
4.
L
L (left) and