Advertisement
Table of Contents
RS 110 II & RS 120 II
General Guide:
Connecting the transmitter to the mains and audio source to make functional.
Connect the mains unit to the socket at the rear of the transmitter. Plug the mains unit in to a wall
socket. After connect the audio cable to the appropriate audio source. Switch on the audio source. The
transmitter automatically switches on and off together with the audio source. The ON/OFF lights up
green.
Complete This Set Up and
Provide the audio signal
Note:
1. Mains ON & Audio Source* OFF
2. Mains ON & Audio Source* ON
*Audio Source can be Television, MP3 player, Mobile Phones, HI-FI systems etc.
The ON/OFF green LED will Lights up
-
ON/OFF Led will not light UP
-
ON/OFF led lights up Green.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sennheiser RS 110 II
Summary of Contents for Sennheiser RS 110 II
- Page 1 RS 110 II & RS 120 II General Guide: Connecting the transmitter to the mains and audio source to make functional. Connect the mains unit to the socket at the rear of the transmitter. Plug the mains unit in to a wall socket.
- Page 2 Troubleshooting 1. After switches on the Mains the ON/ OFF led will not turned up. Check after mains ON whether any audio signal has been provided to your transmitter or not. Without audio signal the ON/OFF light will never turn up. After all set up if the ON/OFF light again not turned up, the power adaptor might be defective.
Need help?
Do you have a question about the RS 110 II and is the answer not in the manual?
Questions and answers