Connecting The Transmitter To The Power Supply System - Sennheiser RS 120-W Instruction Manual

Getting started
12 | RS 120-W
B
OFF
Some TV models mute the loudspeakers when you connect the
transmitter to the 3.5 mm headphone socket. Other TV models have
their own menu for adjusting the volume of the headphone socket.
Check the menu of your TV for information on how to deactivate the
muting function or adjust the volume. Alternatively, connect the TV
and the transmitter using a different connection possibility (A or C).
Connection possibility C: Optical (digital)
C
If your audio source has only a digital audio output, you can use an
analog-to-digital converter (to be ordered separately) to connect the
transmitter.
1. Plug the converter onto the stereo RCA audio cable.
2. Connect the converter to the digital audio output of your audio
source.
C
Connecting the transmitter to the power
supply system
1. Select a suitable country adapter and slide it onto the power
supply unit until it clicks audibly into place.
2. Connect the connector of the power supply unit to the connection
socket of the transmitter.
3. Plug the power supply unit into the wall socket.
The ON/OFF
The ON/OFF
present. For this, the audio source must be connected to the
transmitter and switched on.
OFF
LED lights up green. The transmitter is switched on.
LED only lights up green when an audio signal is
TV VOLUME
PHONES
TV VOLUME
OPTICAL