Getting Started; Setting Up The Transmitter - Sennheiser RS 120-W Instruction Manual

Getting started

10 | RS 120-W
Getting started

Setting up the transmitter

▷
Set up the transmitter. When doing so, make sure that the follow-
ing conditions are met:
– The transmitter is close to the audio source to connect the
cables.
– The transmitter is at least 20"/50 cm away from other wireless
devices in the room to avoid interference.
– The transmitter is not located near metal shelves, reinforced
concrete walls or other metal structures. This can affect the
range of the transmitter.
Hanging the transmitter on a wall
CAUTION
Injuries due to the transmitter falling down!
If the transmitter falls from great heights, this can cause
injuries.
▷
Mount the transmitter at a maximum height of 2 m.
The transmitter can be hung on a wall. For this, you will need mount-
ing material suitable for the wall (* screw and, if necessary, a dowel,
to be ordered separately).
1. Fasten the screw to the wall.
2. Hook the screw head into the opening on the back of the transmit-
ter.