Stopping The Chipper; Location And Use Of Safety Switches - Farmi PROFI CH27 DMR Operation, Maintenance And Spare Parts Manual

STOPPING THE CHIPPER

Slow the tractor engine speed to idle before
disengaging the PTO. This is especially impor-
tant with tractors featuring a PTO brake. Turn
the PTO control lever slowly to the OFF posi-
tion.
When the chipper is shut
down, the cutting disk con-
!
tinues to rotate - just like a
flywheel - after the PTO has
been disengaged.
DANGER!
Please wait until the disk
has stopped completely
before performing any
further actions.
The chipper requires approx. 9 minutes to
slow down from maximum speed to complete
stop (1000 rpm -> 0 rpm).
CH27 DMR

LOCATION AND USE OF SAFETY SWITCHES

If necessary, the feed can be shut off using a
safety switch. The feeder device will stop imme-
diately when the safety switch is pressed. Note!
The rotor will continue rotating.
A fixed safety stop button is located at the front
of the feed chute on the right and left.
FIXED SAFETY SWITCH
58