Cuckoo CRP-RT10 Fuzzy Series Operating Instructions Manual page 68

TO KEEP COOKED RICE WARM AND TASTY
Controlling Method of Warming Temperature
If the temperature in the rice cooker is not set properly, an odor or the color of the rice may change even
though it is cleaned frequently and boiled up. Temperature needs to be set.
Device Temperature Control
1. When you smell bad odors and the rice is too watery: The keep warm temperature is too low.
In this case, increase the "Keep Warm" temperature by 2-3℃.
2. When the rice has a yellowish color or is too dry: The Keep Warm temp is too high.
In this case decrease the "Keep Warm" temperature by 2-3℃.
How to Operate Under CUCKOO Customized Taste Function.
Use it while opening the lid when there is too much water or rice becomes too soft.
1. If too much water is spilled out when you open the lid :
2. If the edge of rice is too soft :
68
❶ Press the "TIME/SETTING" button for 2 seconds at standby mode to enter
warming temperature setting mode.
The display will show as seen in the image. Current keep warm temperature
will show.
❷ Press "MENU/SELECT" button so that the display shifts.
❸ After setting the desired temperature, press "HIGH PRESSURE
WARM/REHEAT" button to automatically input the selected temperature and
entre the standby mode (if you press "CANCEL" button or do not operate for
7 seconds, setting will be cancelled and you will go back to standby mode.)
或
(When you press "TIME/SETTING" button, you will enter the customized Keep
Warm setting mode without saving the changed value.)
❶ Press the "TIME/SETTING" button for 2 seconds at standby mode to enter
warming temperature setting mode.
Press "TIME/SETTING" button 1 time to enter the customized Keep Warm
setting mode.
❷ Press the "MENU/SELECT" button so that the display shifts.
❸ After setting the desired temperature, press "HIGH PRESS./TURBO" or "KEEP
WARM/REHEAT" button to automatically input the selected temperature and entre the
standby mode (if you press "CANCEL" button or do not operate for 7 seconds,
或
setting will be cancelled and you will go back to standby mode.) (When you press
"TIME/SETTING" button, you will enter the customized Keep Warm setting mode
without saving the changed value.)
Press "MENU/SELECT" button to raise the setting mode.
Press "MENU/SELECT" button to reduce the setting mode.
" or "KEEP