Cuckoo CRP-RT10 Fuzzy Series Operating Instructions Manual page 50

HOW TO CLEAN
The all-stainless cover is not only delamination-free and easy to clean, but it also lasts long,
In addition, CUCKOO's special stainless CSV-a CUCKOO's patented technology, improves the
product's durability and makes it easier to clean.
How to install the Double Motion Packing (Pressure Packing)
•Proper maintenance of the pressure packing helps keep high airtightness, adds durability to packing and ensures the taste of the food.
•Read the directions below carefully to install your packing properly.
How to remove and clean the pressure packing
1
① Unplug the power cord and wait until the
pot cools down before opening the Top
Cover.
How to reassemble the pressure packing
2
▶ Figure.1
• First match the standard notches on the Inner Pot lid with the standard points on the pressure packing following the numerical order (1, 2, 3, 4, 5, 6).
Then, press the outer rim of the packing to insert it into the groove. To reassemble the pressure packing follow the order described below:
① As the Figure 1 shows, put the point #1 on the pressure packing with the standard
notch #1 on the Inner Pot lid together before pressing the outer rim of the packing
to insert it into the groove. Repeat with points #2 to # 6.
50
② To remove the pressure packing, hold it as
shown in the picture above and pull it out.
1
5
3
4
6
2
③ After hand washing it with a neutral
cleaning liquid and a sponge, wipe it
clean with a well wrung dish cloth.
Standard notches
on the Inner Pot lid.
② After matching the standard points 1 to 6, press the rest of the packing into the
groove by pushing on its outer rim.
Standard points
on the pressure packing.