Mira Enduro Installation & User Manual page 4

1.13.Mains connections are exposed when the guards and covers are removed.
1.14.Moving parts are exposed when the guards and covers are removed.
1.15.Refer to the wiring diagram before making any electrical connections.
1.16.Ensure all electrical connections are tight, to prevent overheating.
2. Caution!
2.1. Read all of these instructions and retain this guide for later use.
2.2. Pass on this guide in the event of change of ownership of the installation site.
2.3. Follow all warnings, cautions and instructions contained in this guide.
2.4. Follow all warnings, cautions and instructions contained on or inside the Mira
Enduro.
2.5. The electrical installation must comply with the "Requirements for Electrical
Installations" commonly referred to as the IEE Wiring Regulations, or any
particular regulations and practices specified by the local electricity supply
company, in force at the time of installation. The installation should be carried out
by an electrician or contractor who is registered or is a member of an association
such as:
2.5.1. National Inspection Council for Electrical Installation and Contracting
(NICEIC), throughout the UK.
2.5.2. The Electrical Contractors Association (ECA), England and Wales.
2.5.3. The Electrical Contractors Association of Scotland (ECAS).
2.6. The plumbing installation must comply with Water Supply Regulations/Bye-laws
(Scotland), Building Regulations or any particular regulations and practices,
specified by the local water company or water undertakers. The installation should
be carried out by a plumber or contractor who is registered, or is a member of, an
association such as:
2.6.1. Institute of Plumbing (IPHE), throughout the UK.
2.6.2. National Association of Plumbing, Heating and Mechanical Services
Contractors (NAPH & MSC), England and Wales.
2.6.3. Scottish and Northern Ireland Plumbing Employers' Federation (SNIPEF),
Scotland and Northern Ireland.
2.7 System configurations or pump applications other than those shown (see
Figure 3) may cause inefficient or impaired operation of the system, which may
damage the pump unit. If the system configurations shown are not possible,
consult Kohler Mira for advice before commencing installation.
2.8. Anyone who may have difficulty understanding or operating the controls of any
shower should be attended whilst showering. Particular consideration should be
given to the young, the elderly, the infirm, or anyone inexperienced in the correct
operation of the controls.
2.9. When the Mira Enduro has reached the end of its serviceable life, it should be
disposed of in a safe manner, in accordance with current local authority recycling,
or waste disposal policy.
4