Table of Contents
Advertisement
en Troubleshooting
3.
Hook the rear retainers with the hook into the top
hole
and push them into the bottom hole
23.3 Attaching the rails
Notes
¡ When hanging the rails, ensure that the pull-out is at
the bottom.
24 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
24.1 Malfunctions
Fault
The appliance is not
working.
"Sprache Deutsch"
appears in the dis-
play.
The operation does
not start or is inter-
rupted.
32
Cause and troubleshooting
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
Electronics fault
1.
Briefly disconnect the appliance from the power supply by switching off the fuse.
2.
Reset the basic settings to the factory settings.
→ "Basic settings", Page 24
There has been a power cut.
▶
Implement the settings for the initial configuration.
→ "Carrying out the initial configuration", Page 13
Malfunction
▶
Call the after-sales service.
→ "Customer Service", Page 34
Different causes are possible.
▶
Check any notifications that appear in the display.
→ "Displaying information", Page 14
¡ The rails only fit on the right or left.
.
¡ For both pull-out rails, ensure that you can pull them
forwards and out.
1.
Set the rear rail at an angle, hooking it into the re-
tainers at the top and bottom
2.
Pull the rail forwards
3.
Hook in the rail at the front
4.
Push the pull-outs in completely.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
.
.
and press it down
.
Advertisement
Table of Contents
