Related Manuals for ABQ Industrial DELMHORST J-2000
Summary of Contents for ABQ Industrial DELMHORST J-2000
- Page 1 8 To Check Accumulated Readings 8 To Reset Meter 9 Care of Your Meter 10 Service For Your Meter 11 Warranty Distributed by: ABQ Industrial LP USA Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451 Web: https://www.abqindustrial.net E-mail: info@abqindustrial.net...
- Page 2 When the battery is removed and then reconnected, the BEFORE YOU BEGIN meter displays its software version for one second and then D E L M H O R S T J - 2 0 0 0 turns itself off. After replacing the battery, you must reset Key Functions the meter as described in Resetting the Meter section.
- Page 3 SET PIN CALIBRATION SET TEMPERATURE When scrolling in either direction, release the key to stop at your desired species. The basic factory calibration of the J-2000 is for use with The J-2000 defaults to a temperature of 70ºF. As wood When working with a species or wood-based material non-insulated pins.
- Page 4 Species #1 (Douglas Fir) at 70ºF, followed by 444 (pin setting). All of the readings in memory will be cleared. Distributed by: ABQ Industrial LP USA Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451 Web: https://www.abqindustrial.net E-mail: info@abqindustrial.net...
Need help?
Do you have a question about the DELMHORST J-2000 and is the answer not in the manual?
Questions and answers