Table of Contents
Advertisement
2.2
Connection to the mains voltage
Attention! High touch current possible! Before connecting the power supply,
MAGIC THipPro must be earthed.
For this purpose, the earthing cable must have a conductor cross-section of at least
2.5mm² if it is mechanically protected, or otherwise 4.0mm².
The following graphic symbols are located on the rear of the unit to indicate the
correct and safe use.
After plugging the power cable and switching on the device, the unit boots within
30 seconds.
An additional power supply socket for connecting an external 5 V power supply unit
is optional available.
11
Advertisement
Table of Contents
