Husqvarna 545 Workshop Manual page 39

7
ismantle the pump cover
the control diaphragm
8
Unscrew screw P and remove needle valve
lever arm , shaft L and spring R.
9
Use a needle or similar device and carefully pull up
the fuel screen (W). See figure 39.
10
If necessary, dismantle throttle valve T and choke
valve U and air valve S, and remove the shafts
with lever arms and springs (see figure 39).
11
If necessary, dismantle the AutoTune A unit. See
figure 39.
and carefully remove
and gasket .
with
L
M
P
Fig 38
Repair Instructions
H
J
K
Q
R
39
English -