Saving A Station - Silvercrest SWED 250 A1 User Manual And Service Information

SilverCrest SWED 250 A1
 First, select the desired frequency band. To do so, repeatedly press the
BAND button [5] to go from one frequency band to another in
succession. The tuned frequency is shown on the display [8].
 Pull out the telescopic aerial [1] completely.
 Press the < SEARCH [6] or SEARCH > [7] button briefly or repeatedly
to tune in the desired frequency manually. To search automatically for
a station, press the < SEARCH [6] or SEARCH > [7] button a little
longer. The frequency is shown on the display in MHz (FM and SW)
or in kHz (MW). If necessary, move the telescopic aerial in a different
direction, or change the position of the device to improve the
reception.

Saving a station

After you have selected a station, you can save it as follows:
 Press the MEM button [4].
 "P" then flashes on the display [8], followed by 01 to 10.
 Select the desired programme preset using the M– [2] or M+ [3]
button.
 Press the MEM button [4] again briefly to save the station to the
currently selected programme preset.
 The station is saved and the frequency of the station is then indicated
on the display [8].
20 - English