Toro Multi-Pro 5800 Installation Instructions Manual page 16

1. Suction lance
2. Use the free end of the lance to pierce the bag or
container to vacuum powdered or liquid chemical.
3. Place the lance end into a clean container of water to
rinse the lance assembly.
4. Remove the lance body from eductor and drain any
remaining fluid into the hopper.
5. Close the hopper valve (red handle).
Shutting down the Eductor
1. Close all the valves.
Note: Close the hopper valve first.
2. Remove all chemical residue.
3. Close and lock the hopper lid by turning the cover
clockwise.
4. Return the agitation valve to the fully open position.
5. Close the eductor valve.
6. Return the eductor to the transport position, and lock
it with the transport strap.
Figure 26
2. Eductor
16