Beko BHCA63741BHSI User Manual page 19

5
Installation of appliance
5.6 Installation of air baffle
While using with the carbon filter, air baffle is
provided with your appliance with the aim of re-
releasing the air which is cleaned with carbon filter
from the perforated located on the flue. Assemble
the air baffle as below.
(Figure 13)
There is a tab in the middle of the flue connection
plate. Place the middle point of this tab on the line
that is drawn perpendicular to the wall. Align hori-
zontally and mark the holes where the connection
plate will be mounted via a pen (Figure 13/A, B).
Drill the marked points with Ø6mm drill and in-
sert two Ø6mm plastic dowels in the drilled holes
(Figure 13/A, B).
Fix the flue connection plate to the wall with
3.9x22 screws (Figure 13/A, B).
For air baffle assembly, install point C, D, E, F with
Ø6mm drill and Ø6mm plastic dowels (Figure
13).
Assemble cooker hood's body (Figure 9).
Cooker Hood / User Manual
(Figure 14)
1. Flap pin socket
2. Flap pin
Attach the flue flaps to the plastic flue adapter in
the package content as follows.
Insert the plastic pin (Figure 14/area no. 2) on
the pin socket on the motor exhaust (Figure 14/
area no.1). Then bend the flap lightly to insert the
other pin on the flap and insert the other pin to its
socket (Figure 14).
(Figure 15)
1. Air baffle
2. Plastic flue
Attach the plastic flue adapter, which is included in
the package, in the direction of the air baffle. Lock
the flue adapter by turning it in the direction of the
arrow (Figure 14).
1
2
19 / EN