Battery-low
condition takes place.
You cannot disable the Power management Mode parameter in
BIOS Utility if APM is installed under DOS, Windows or
Windows 95. To disable APM, type
or disable the Power icon in the Windows Control Panel.
6.1.6
Load Default Settings
Selecting this option allows you to load all the default settings. The default
settings are the values initially stored in CMOS RAM intended to provide
high performance. If in the future, you change these settings, you can load
the default settings again by selecting this option.
When you select this option, the following prompt appears:
Select
[Yes]
to load the default settings or
Setup
Load Setup Default Settings?
[Yes]
[No]
to abort the operation.
• Disabled*
under DOS,
Power Off
[No]
6-9