iSMA-B-MG-IP User Manual
7 iSMA-B-MG-IP WEB Configuration
7.1 Web Server Access
The iSMA-B-MG-IP device has a built-in web server, which allows to show device status
and to change configuration.
To access the web server, open a browser and enter an IP address of the device, default
address for new device (default IP address is 192.168.1.123). Please use the following
credentials:
Username: platform
Password: 1000 (default)
7.2 Device Page
This page contains information and technical specification of the device. The Basic
Information section includes information about a device type, firmware version, and
uptime. In the Device Specification section there are information about power supply,
inputs/outputs parameters, interfaces, and mechanical specification.
Figure 17. Device page
7.3 M-Bus Configuration
This page allows to enter configuration parameters and show information of the M-Bus
interface.
www.ismacontrolli.com
DMP260en | 1st Issue rev. 6 | 05/2022
page 24 of 29
Need help?
Do you have a question about the iSMA-B-MG-IP and is the answer not in the manual?