Table of Contents
Advertisement
iSMA-B-MG-IP User Manual
Register Name
GATEWAY
HTTP PORT
MODBUS TCP PORT
MODBUS TCP TIMEOUT
RS485 TIMEOUT
SEND MODBUS ERRORS
MBUS BAUD RATE
MBUS TCP PORT
MBUS UDP PORT
4.8.1 Restoring Default Settings
To restore the default configuration of all registers, follow the steps below:
•
Turn off the power supply.
•
Set section 6 of the S3 switch to on.
•
Turn on the power supply, power LED is blinking.
•
Switch section 6 of the S3 switch to off to restore the default settings. To cancel the
reset, turn off the power, and switch section 6 of S3 switch to the off position.
Table 4. Default values
www.ismacontrolli.com
Default Value
192.168.1.1
80
502
60 s
500 ms
DISABLE
2400
6021
10002
DMP260en | 1st Issue rev. 6 | 05/2022
page 11 of 29
Advertisement
Table of Contents
Need help?
Do you have a question about the iSMA-B-MG-IP and is the answer not in the manual?
Questions and answers