WeTech WTC690 User Manual

USER MANUAL

WTC690

Article number: 600090

Thank you for purchasing a WeTech® product. This user manual contains important safety

and operating instructions for your Passiv charger. Before using your charger, read this

manual and all warning instructions with care in order to avoid possible danger.

This product is suitable for the charging of MOTOROLA batteries NNTN4655A, NNTN4655B

and PMNN4351.

Made in Germany

Table of Contents

Need help?

Do you have a question about the WTC690 and is the answer not in the manual?

Page 1 WTC690 Article number: 600090 Thank you for purchasing a WeTech® product. This user manual contains important safety and operating instructions for your Passiv charger. Before using your charger, read this manual and all warning instructions with care in order to avoid possible danger.
Page 2 Under no circumstances should you use water or other liquids. Scope of delivery The following items are included in the scope of delivery: Passiv-Charger WTC690 Holding bracket for WTC690 Passive accessory set Start of the sy stem Passive accessory set Connect the strands (1) of the DC cable provided to mains power.
Page 3 Battery detected. Battery capacity over 80% LED Slot 2 Quick charging of Slot 2 active. Battery capacity under 80% DC socket for power supply voltage in DC-Buchse accordance with the technical data. Schematic drawing WTC690 © WEMPE Elektronic GmbH...
Page 4 The correct disposal of this product supports environmental protection and prevents possible damage to the environment and human health. Contact This product was manufactured in Germany by: WEMPE Elektronic GmbH phone: +49 6621 9240-0 Leinenweberstr. 6 fax: +49 6621 9240-44 DE-36251 Bad Hersfeld website: www.wetech.de e-mail: info@wetech.de Made in Germany...

600090