Table of Contents
Advertisement
Chapter 11
Miscellaneous SSG Features
Service B_512
Set2, set3, and set4
Service C_2048
Set2, set3, and set4
Service D_1024
Set2
Expansion of Service IDs
The Cisco 10000 router uses service IDs to determine which services a user is subscribed to and how to
police the user traffic. A user can be subscribed to a maximum of seven services. However, service
translation can result in more than seven network sets. To support the service translation mechanism, the
expansion of service IDs enhancement expands the number of service IDs supported from seven to 15.
Restrictions for Expansion of Service IDs
The expansion of service IDs enhancement has the following restrictions:
•
•
Configuration Example for Expansion of Service IDs
The following example shows how service IDs are expanded to allow a user to be subscribed to more
than seven sets. In this example, the user is subscribed to five services, which is within the seven-services
limit. After service translation, the user is subscribed to eight sets, which is within the expanded service
IDs limit of 15 network sets.
Service Definitions:
ssg bind service Rate-1 <next hop ssg>
ssg bind service Rate-2 <next hop ssg>
ssg bind service Rate-3 <next hop ssg>
ssg bind service Rate-4 <next hop ssg>
ssg bind service Rate-5 <next hop ssg>
OL-4387-02
When service translation is used, the Cisco 10000 router supports a maximum of 15 sets per SSG
VRF. If all of the users are configured in the same VRF, the router supports a maximum of 15
network sets per system.
A user can be subscribed to a maximum of seven services and a maximum of 15 network sets.
0.0.0.0/0.0.0.0
10.58.252.0/255.255.255.0
10.58.253.0/255.255.255.0
10.58.254.0/255.255.255.0
10.58.102.6/255.255.255.255
10.58.251.0/255.255.255.0
10.58.250.0/255.255.255.0
10.58.249.0/255.255.255.0
Cisco 10000 Series Router Service Selection Gateway Configuration Guide
SSG Enhancements for Overlapping Services
11-11
Advertisement
Table of Contents
