Cisco OL-4387-02 Configuration Manual page 34

RADIUS Accounting Records
Example 4-6
Example 4-6
NAS-IP-Address = 192.168.2.48
NAS-Port = 0
NAS-Port-Type = Virtual
User-Name = "zeus"
Acct-Status-Type = Stop
Service-Type = Framed-User
Acct-Session-Id = "00000002"
Acct-Terminate-Cause = User-Request
Acct-Session-Time = 84
Acct-Input-Octets = 0
Acct-Output-Octets = 649
Acct-Input-Packets = 0
Acct-Output-Packets = 17
Framed-Protocol = PPP
Framed-IP-Address = 201.168.101.10
Control-Info = "I0;0"
Control-Info = "O0;649"
Service-Info = "Ninternet"
Service-Info = "Uzeus"
Service-Info = "TP"
Acct-Delay-Time = 0
The following describes some of the attributes included in the record. For more information, refer to the
Service Section Gateway, Release 12.2(15)B feature
Acct-Status-Type—Indicates that the accounting-request marks the end of the user service.
•
Service-Type—Indicates the type of service.
•
Acct-Session-Time—Indicates how long the user has been receiving service and is expressed in
•
seconds.
Acct-Terminate-Cause—Indicates the reason for service termination, which can be due to the
•
following events:
–
–
–
–
–
Cisco 10000 Series Router Service Selection Gateway Configuration Guide
4-4
shows the information contained in an accounting-stop record for service termination.
RADIUS Accounting-Stop Record for Service Termination
User-Request
Lost-Carrier
Lost-Service
Session-Timeout
Idle-Timeout
Chapter 4 Authentication and Accounting
module.
OL-4387-02