Always clean the mattress before putting back into service and inspect/audit
the mattress and cover. Not observing this instruction may result in creating
hazardous situations and posing risks such as infection
3.4 Flammability
The Opera Serene meets the requirements of BS7177:2008 for medium
hazard. The mattress meets the requirements of The Furniture & Furnishings
(Fire Safety) Regulations 1988.
4. Safety Instructions
4.1 General Safety Instructions
During the briefing, specific attention must be drawn to any potential dangers
for the first time, the instruction manual must be read conscientiously and in
detail by the user / care personnel.
Any incidents or issues must be reported to Opera at, support@operabeds.
com.
When the mattress is used with a care bed make sure that the mattress
meets the requirements of the care bed, failure to do this may result in in
causing entrapment hazards and injury.
When using the mattress with side rails, the side rail height from the top of
the mattress in an uncompressed condition and the top edge of the side rail
must be minimum of 220mm, failure to comply may result in injury caused by
entrapment or falls.
If the cover is compromised the mattress should be withdrawn from use
immediately, if the foam and cover are compromised the mattress and cover
should be withdrawn from use immediately and replaced. Failure to withdraw
the mattress and cover from use poses a significant risk of infection to the
patient and any carers.
Do not pierce or compromise the mattress cover, this will compromise the
foam and poses a significant risk of infection to the user and any carers.
Do not use the mattress without the mattress cover, failing to observe this
warning will compromise the infection and control properties of the mattress,
3. Maintenance and Inspections
operabeds.com | 0333 222 8584 |
8
Need help?
Do you have a question about the Serene Profiling and is the answer not in the manual?
Questions and answers