Table of Contents
Advertisement
Available languages
Available languages
Top Panel
1.
Power LED: Illuminates when the mixer is on.
2.
Mic Gain: Adjusts the audio level of the microphone signal.
3.
Mic Bass: Adjusts the low (bass) frequencies of the microphone channel.
4.
Mic Treble: Adjusts the high (treble) frequencies of the microphone channel.
Tip: If you experience feedback when using a microphone at loud levels, try turning down
the high (treble) frequencies.
5.
Channel Gain: Adjusts the channel audio gain level, pre-fader and pre-EQ.
6.
Channel Treble: Adjusts the high (treble) frequencies of the corresponding channel.
7.
Channel Mid: Adjusts the mid-range frequencies of the corresponding channel.
8.
Channel Bass: Adjusts the low (bass) frequencies of the corresponding channel.
9.
Input Selector: Selects the input source to be routed to the corresponding channel.
10. Channel Fader: Adjusts the audio level sent to the Program mix.
11. Cue Gain: Adjusts the audio level of the Cue channel in the headphones.
12. Headphones Output: Connect your 1/4" (6.35 mm) headphones to this output for cueing
and mix monitoring.
5
4
6
3
2
7
8
9
5
6
18
7
17
8
16
10
15
1
13
11
14
9
10
12
5
Advertisement
Table of Contents
