Operation; Installation Checklist Before Operation; Using The Temperature Control Panel - EdgeStar CBR1501SSOD Owner's Manual

Outdoor beverage refrigerator
Hide thumbs Also See for CBR1501SSOD:
Table of Contents

Advertisement

Operation

Installation Checklist before Operation

1. Have all packing materials and tape been removed from the interior and exterior of the refrigerator?
2. Have the installation instructions been followed, including connecting the machine to electricity?
And has proper grounding been installed for the refrigerator?
3. Has the machine been leveled?
4. Is the refrigerator in a site where the ambient temperature is between 50° F and 90° F all year
round?
5. Is there a clearance of at least 1- 2" at the rear, 1/4" at the top, and 1/4" at the sides for proper air
circulation?

Using the Temperature Control Panel

The refrigerator has a temperature range from 38°F to 65°F and will display the set temperature.
Power Button: Press and hold for approximately 3 seconds to turn the unit on or off.
Up Button: Press to increase the temperature by 1 degree increments.
Down Button: Press to decrease the tempreature by 1 degree increments.
i
Run Light: When lit, the unit is in cooling mode.
i
°C/°F Button: The Celcius or Fahrenheit light will be lit depending on which temperature
type is being displayed. To switch between C and F press the °C/°F button. A beep will
occur and the indicator light will illuminate next to desired temperature setting.
14
ºC/ºF
RUN
C
F

Advertisement

Table of Contents
loading

Table of Contents