Samsung NV7B402 C Series Manual page 147

A
B
C
D
Mounting the oven
A
SIMPLE_NV7B40403CK_U1_DG68-01419C-00.indb 7 SIMPLE_NV7B40403CK_U1_DG68-01419C-00.indb 7
Under-sink cabinet (mm)
A Min. 550
B Min. 560
C Min. 600
Min. 460 x Min. 50
D
NOTE
The built-in cabinet must have vents (D) to
ventilate heat and circulate the air.
Installing with a hob
To install a hob on top of the oven, check
the installation guide of the hob for the
installation space requirement ( ).
Make sure to leave a gap (A) of at least
5 mm between the oven and each side of
the cabinet.
Secure at least 3 mm of gap (B) so that the
B door opens and closes smoothly.
Fit the oven into the cabinet and fix the
oven firmly on both sides using 2 screws.
After installation is complete, remove the protective film, tape, and other packing
material, and take out the provided accessories from inside the oven. To remove
the oven from the cabinet, first disconnect power to the oven and remove
2 screws on both sides of the oven.
WARNING
The oven requires ventilation for normal operation. Do not block the vents under
any circumstance.
NOTE
The actual appearance of the oven may differ with the model.
English 7
2022-04-26 오후 3:05:07 2022-04-26 오후 3:05:07