VIETA ONE VO-BS10 User Manual page 29

1. After turning on the speaker, the speaker will search for the last paired device. The
13
operating mode indicator will flash in blue. If the unit finds the paired Bluetooth device, a
beep sound is heard and operating mode indicator will keep in blue and stop flashing.
2. After successfully pairing (linking), you can begin playing music from your Bluetooth
device wirelessly to the speaker.
3. Press the + / - button on the speaker to adjust to the desired volume level.
Using The Speaker as a Handfree Bluetooth Speakerphone
1. Link your cell phone to the speaker via Bluetooth as described above .
2. When receiving an incoming call on your cell phone , tap button on the speaker to
switch the incoming call from cell phone to the speaker. A short beep sound will be heard
confirming the call was answered. Complete your call using the built-in microphone and
speaker.
3. Adjust the volume control of your cell phone to obtain the desired sound level.
4. To end the call, just tap the button again, a short beep sound will be heard and the
call will end. If you were playing music from your cell phone to the speaker before
answering the call, the music will automatically resume playing when you hang up .
5. To ignore an incoming call, simply press and hold the button on the speaker for
about 2 seconds, a beep sound will be heard and the call will be ignored .
Operating the speaker in TF-card mode
• Insert the TF card carefully to the speaker to access TF card mode, the operating mode
indicator will be changed to Purple color. The TF card will start playing automatically in few
seconds.
• Press
button to pause or resume playback.
• Press and hold the "+" or "-" button to raise up/lower the volume level.
• Short Press "+" button to skip to next track or press "-" button to the previous track.
• To remove your TF card, simply pause the playback and gently unplug it from the slot.
Remember to turn off the speaker, too.