Battery Charging Instruction; Charging The Battery For First Time; Recharging The Internal Battery - VIETA ONE VO-BS10 User Manual

• Clean the unit with a damp (never wet) cloth except metal contact or speaker grille,
7
Solvent or detergent should never be used.
• Avoid leaving your unit in hot, humid or dusty places.
• Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
• Always keep your finger dry and clear before touching all the buttons.
• Do not dispose of batteries in fire, batteries may explode or leak.

Battery charging instruction

This unit operates on a built-in Li-ion battery that can be recharged either using the USB
port on your computer or from a USB power adaptor (not included) with a rated output of
DC 5V 500mA and up.
Note: The mini USB CHARGING JACK located on this unit is only designed for charging the
built-in Li-ion battery.
Charging the battery for first time
1.) Charge the built-in Li-ion battery a minimum of 2 hours prior to first use.
Plug the unit into the USB port on your computer or into a USB power adaptor (not
included) using the included USB cable.
2.) The battery charging indicator flashes while charging and it stops flashing when the
unit is fully charged.
Unplug the USB cable from the power source once the battery is fully charged.

Recharging the internal battery

After prolonged use, the internal battery will become weak and the operation may become
intermittent. When the internal battery capacity is very low, the battery Indicator will
rapidly flash in red to alert you to recharge the internal battery as soon as possible.
Plug the speaker into a USB port on your computer by using the included USB cable or into