4-stream digital media center with progressive-scan dvd-video playback and 250g internal hard drive, digital media center with progressive-scan dvd-video/audio playback, 7 x 85w 7.2-channel a/v receiver with hdmi switching/repeater and audio/video process (40 pages)
TABLE OF CONTENTS INTRODUCTION AND FEATURES REMOTE CONTROL FUNCTIONS BATTERIES PROGRAMMING SOURCES ADVANCED FUNCTIONS Punch-Through Programming Macros Resetting the Remote APPENDIX Remote Control Function List Remote Control Product Codes TAPE THE BRIDGE/DMP...
(or even products that may be released in the future). The single RCP 6 remote replaces the original remotes supplied with the AVR 247 receiver and DVD 38 DVD player. Although the RCP 6 operates both products, along with a host of other products you may have added to your system, this manual describes a few differences from the original remotes.
REMOTE CONTROL FUNCTIONS The RCP 6 remote is capable of controlling 11 devices, including the AVR 247 and the DVD 38 included in the CP 60 system. During the installation process, you may program the codes for each of your source components into the remote.
Page 5
IR Transmitter Lens Power On Program Indicator AVR Selector AM/FM XM Radio Test Tone Sleep/Audio Select Surround/Title On-Screen Display/Disc Info Channel Level/Disc Menu Digital Input Select/ Drawer Open/Close Tuning Mode/Zoom Direct Station Entry/Angle Tuning Tone Mode/DVD Scan Type ® Surround/A-B Repeat ®...
Page 6
REMOTE CONTROL FUNCTIONS Test Tone Button: Press this button to activate the test tone for manual output-level calibration. TV/Video/Video Off Button: This button has no effect on the receiver, but is used to switch video inputs on some video source components.
Page 7
REMOTE CONTROL FUNCTIONS When the DVD player has been selected, this button performs the Zoom function. Press it to zoom in on a DVD, VCD or JPEG image. The image may be enlarged by a factor of 2x, 3x, 4x or 5x. Once the on-screen indication of the zoom ratio disappears from the screen, you may use the Navigation Buttons to explore the picture.
See the AVR 247 manual for more information. BATTERIES The RCP 6 remote control uses three AAA batteries, which are included. To remove the battery cover located on the back of the remote, firmly press the ridged depression and slide the cover toward the top of the remote.
Programming Sources The RCP 6 remote is capable of controlling not only the receiver and DVD player included in your CP system, but it may also be programmed to control many brands and models of VCRs, CD players, cable boxes, satellite receivers, cassette decks and TVs, as well as an iPod (not included) docked in Harman Kardon’s optional The Bridge.
Page 10
If you are unable to locate a code set that correctly operates your source device, it will not be possible to use the RCP 6 remote to control that device. However, you may still connect the source to the AVR 247 and operate it using the device’s original remote control.
The RCP 6 remote control not only operates the AVR 247 and DVD 38, but it also serves as a universal remote that may be programmed to operate many of your other home theater components. The punch- through and macro features add even more flexibility and versatility.
Table A1 – Remote Control Function List No. Button Name AVR Function CD/CD-R 1 Power On Power On Power On Power On 2 Power Off Power Off Power Off Power Off 3 Mute Mute Mute (AVR) Mute (AVR) 4 AVR...
Page 14
APPENDIX Table A1 – (continued) No. Button Name AVR Function CD/CD-R 40 Tun-M/Zoom Tuning Mode Zoom Repeat 41 9 42 0 43 Memory/Playlist Memory Playlist Ti m e 44 Tuning Up Tuning Up Track Direct 45 Direct/Angle Direct Tuner Entry Angle Random Play 46 Clear Clear...
Page 15
Refer to Tables A2 through A9 when programming the codes for your components into the remote. Table A2 – Remote Control Product Codes – TV TV Manufacturer/Brand Setup Code Number A MARK 122 132 ADMIRAL AIWA AKAI 123 160 AMPRO...
Page 19
HARMAN KARDON TEN TECHNOLOGIES Harman Kardon and Logic 7 are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Designed to Entertain and EzSet/EQ are trademarks of Harman International Industries, Incorporated. Dolby is a registered trademark of Dolby Laboratories.
Need help?
Do you have a question about the RCP 6 and is the answer not in the manual?
Questions and answers