Saeco MAGIC M2 Operation And Maintenance Manual page 64

English
Select the rinse of the coffee unit. Confirm the rinse.
The machine dispenses a sufficient quantity of water to
rinse the coffee circuit. The following screen is
displayed:
This function allows the machine to maintain optimal
hygiene and service conditions, but under no
circumstance should it be considered sufficient as the
only method for cleaning the coffee circuit. Wait until
the cycle stops automatically. The machine will go
back to the normal operating cycle.
10.2.9 Thorough cleaning coffee
unit with "degreasing
tablets".
Besides weekly cleaning, we recommend performing a
cleaning cycle with "Coffee Oil Remover" after
approximately 200 cups of coffee or once a month. This
operation completes the maintenance process for the
brew group. The "Degreasing tablets" for cleaning the
coffee unit and the maintenance products can be
purchased from your local dealer or the authorised
support centres.
The "Coffee Oil Remover"
system has no descaling
properties. For descaling,
use the Saeco descaling
solution and follow the
procedure
the "Descaling" chapter.
64
described in
The wash cycle cannot be interrupted. Do not leave
the machine unattended during this operation.
Access the programming of the machine as described
in the paragraph "Access to the programming menus".
Tap the "menu" icon to view the appliance's menu
functions.
Select "Daily actions". Select "Washing/rinsing". Select
the washing of the coffee unit. Select "Washing".
Confirm the process. The machine summarizes on the
display all the phases to be performed for the washing
step-by-step. For example, the phases are the following:
Fill the water tank.
Remove the drip tray and the coffee grounds drawer.
Empty the coffee grounds drawer and the drip tray.