Fantasea Line 1370 Instruction Manual page 16

2. Hold the camera parallel to the housing and then gently install it inside (image #9). Avoid
inserting one side of the camera prior to the other, as this will make the installation difficult and
might cause damage to the camera or housing.
3. Take special care not to touch or damage the Moisture Detector unit when installing the
camera. The unit is located inside the housing on the inner right side of the housing, opposite
the latch dial (image #10).
MOISTURE DETECTOR UNIT
FG7X III M16 Housing Instruction Manual 20191222
16
Image #9
Image #10