Portrait Settings - Panasonic TH-55SQ1W Operating Instructions Manual

■
[Bezel H adjustment] / [Bezel V adjustment]
Adjust the area of image hidden in the joint
horizontally and vertically respectively.
0 to 100
Display example:
Setting value: 0
Displays the entire image including the joint area.
(Suitable when displaying character information
on PC.)
Setting value: 100
Does not display the image of the joint area.
(Suitable when displaying motion pictures.)
■
[Location]
Assign screen positions on the multi-screen.
Example:
[Horizontal scale] [10], [Vertical scale] [10]
A1 A2
B1 B2
.... ....
I1 I2
J1 J2
Select from A1 - J10.
●
The displayed content for setting changes
according to the settings for the [Horizontal scale]
and [Vertical scale].
●
By setting [Multi screen display] to [Off], it is
possible to check the location on the screen while
the setting menu is displayed.
●
If [Image rotation] is set to [180 degrees], the
enlarged location also rotates. (see page 87)
58
English
....
A9 A10
....
B9 B10
.... .... ....
....
I9 I10
....
J9 J10

Portrait settings

This function displays input images by rotating 90°.
Note
● Set to the input other than [Screen Transfer] /
[MEMORY VIEWER], and then set [Portrait settings].
● For video or picture you want to display, use the ones
with16:9 resolutions.
● About playing back with USB input, refer to "Using
"USB media player"" (see page 111).
● While this menu is displayed, aspect mode will be
[16:9].
[Portrait settings] - submenu screen
Portrait settings
Portrait display
No. of displays
Display format Mode 1
Bezel adjustment 0
Location
■
[Portrait display]
[Off]:
Disables portrait display.
[On]:
Enables portrait display.
When it is set to [On], aspect mode will be [16:9].
■
[No. of displays]
Set the number of displays comprising the portrait
display.
1, 3
■
[Display format]
[Mode 1]:
Displays images without missing portion, however,
some portion of the input images on the right and left
is cut.
[Mode 2]:
Displays the entire input images, however, some
portion of the images on top and bottom is not
displayed.
[Mode 3]:
Displays the entire input images so that the image is
displayed without missing portion.
Note
●
[Mode 1] and [Mode 2] keep the aspect ratio 16:9 but
[Mode 3] doesn't.
■
[Bezel adjustment]
Adjusts the area of image hidden in the joint area on
the portrait screen.
0 to 100
Off
3
1