Customizing The Quick Start Example Project; Downloading And Installing Software Development Tools; Downloading And Importing The Quick Start Example Project - Renesas RA6M2 Quick Start Manual

Renesas RA Family

5. Customizing the Quick Start Example Project

This section provides instructions on customizing the Quick Start example project.

5.1 Downloading and Installing Software Development Tools

Before the Quick Start example project can be modified, it is necessary to download and install software
and development tools on the host PC.
The FSP, J-Link® USB drivers, and e2 studio are bundled in a downloadable platform installer available
on the FSP webpage at renesas.com/ra/fsp. New users are recommended to use the Quick Install option
provided in the installation wizard, to minimize the amount of manual configuration needed.
The QE for Capacitive Touch [RA] tool is a capacitive touch sensor development assistance tool
necessary for modifying capacitive touch sensor functions. Please download the tool from the following URL
and install to the e2studio.
https://www.renesas.com/qe-capacitive-touch

5.2 Downloading and Importing the Quick Start Example Project

1. Download the Quick Start example project from renesas.com/rssk-touch-ra6m2.
2. Launch e2 studio.
3. Browse to the Workspace where the project file is to be imported. Enter the name in the Workspace
dialog box to create a new workspace.
Click Launch.
4.
R12QS0041EJ0100 Rev.1.00
Nov.16.20
RA6M2 Group Capacitive Touch Evaluation System
Figure 4. Creating a New Workspace
Figure 5. Launching the Workspace
RA6M2 Group
Page 7 of 22