USING YOUR NEW X-TRONIC Model #6040-XTS SOLDERING STATION This manual is provided to make a safe and effective use of the X-Tronic 6040-XTS soldering station and to maintain this instrument in proper working condition. Be sure to keep this booklet in a handy place near the unit for future reference.
INITIAL SET-UP 1. Plug the 3-Prong AC cord into a 110/120V grounded outlet to prevent electric shock or injury. 2. Turn the power on by pushing the power switch on the back of the unit. Both LED displays will show “---” and will be blinking. HOT AIR GUN 1.
2. Turn on the soldering iron power switch - the LED display will light up. Push the ENTER button 4 times -the first digit (of 3) for the soldering iron will start blinking. Push the UP or DOWN button to select the first digit of the temperature and then push ENTER.
Page 6
2. Remove the soldering tip and metal soldering tip retaining collar using the above procedure. Unscrew the Black “Bakelite Polymer” Retaining Cap and slide off this secondary heating element retaining collar. 3. Push the Power Cord through the bottom of the soldering iron while (at the same time) gently pulling the heating element out of the top of the iron.
All X-Tronic Products come with 3-Year Guarantee, valid only in the 48 Contiguous United States. If you purchase this product and ship it to a destination outside of the 48 Contiguous United States this warranty ...
Page 8
Compliments please call or email us. Toll Free: 844-861-4762 Info@XTronicUSA.com Our Business Hours are: Monday - Thursday: 8am - 4pm CST Friday: 8am - Noon CST If you would like to shop for other X-Tronic International Products Please visit our website www.XTronicUSA.com...