USING YOUR NEW X-TRONIC Model #3030-XTS SOLDERING STATION This manual is provided to make a safe and effective use of the X-Tronic 3030-XTS soldering station and to maintain this instrument in proper working condition. Be sure to keep this manual in a handy place near the unit for future reference.
INITIAL SET-UP The X-Tronic 3030-XTS comes with two parts. First is the control module that contains all of the control electronics and the soldering iron. Second part is the cradle that is designed to hold the soldering iron during and after soldering use.
SE ERROR MESSAGE When the display shows “SE” this means that the heating element needs to be replaced. The heating element could be worn out or cracked. Note that if you run the soldering iron in the 230°C ~ 280°C range, which is the normal temperature range for most “all”...
Page 6
4. De-solder the 2 Red and 2 Blue wires that have heat shielding on them from the circuit board and pull the heating element away from the mother board. Please take note of the wire colors and location for installation of new heating element. 5.
All X-Tronic Products come with 3-Year Guarantee, valid only in the 48 Contiguous United States. If you purchase this product and ship it to a destination outside of the 48 Contiguous United States this warranty ...
Page 8
Compliments please call or email us. Toll Free: 844-861-4762 Info@XTronicUSA.com Our Business Hours are: Monday - Thursday: 8am - 4pm CST Friday: 8am - Noon CST If you would like to shop for other X-Tronic International Products Please visit our website www.XTronicUSA.com...