PRODUCT SPECIFICATIONS Model XTR-9010-PRO Power of Unit ≤ 80W Power of Suction Gun Temperature Range 662°F~896°F / 350°C~480°C Temperature Stability ±1°C (static) Heating Element Voltage AC 26V ±10% Desolering Pump Power Vacuum Suction 0.05MPa Tip Impedance <2Ω Dimensions 9.2 x 8.0 x 5.3 in / 234 x 202 x 134 mm Weight 9.7 lbs / 4.4 kg...
USER INTERFACE Main Unit 1. Model Number 5. Desoldering Gun Port 2. Temperature Display 6. Function Key 3. Temperature Decrease Button 7. Power Switch 4. Vacuum Port 8. Temperature Increae Button Desoldering Gun 1. Suction Tip 7. Pressure Indicator 2. Heating Element Cover 8.
PRODUCT SET - UP 1. Unpack all of the contents of the X-Tronic 9050-PRO unit. 2. Inspect the unit and accessories for any damage. If damage is detected, please contact X-Tronic immediately (see back of manual for contact information). 3. Connect the vacuum tube from desoldering gun to vacuum port on the front panel of the main unit.
OPERATING GUIDELINES General Set-up & Use 1. Before turning on the unit, choose the nozzle that will be used and install it on the gun. (see page 9 for how to change nozzles). Note: All new nozzle tips have solder in the tip hole to prevent oxidation during first use.
FUNCTION SETTINGS Setting Sleep Timer 1. Turn on the power switch. 2. Ensure the desoldering gun is in the holder. 3. Press the * button. The LCD will read “L01”. The “01” indicates the current sleep time is set at 1 minute. 4.
Page 10
Temperature Calibration Offset 1. Turn on the power switch. 2. Ensure the desoldering gun is in the holder. 3. Press the * button three times. The LCD will read “R00”. The “00” indicates that the current calibration offset temperature is 0°. 4.
MAINTENANCE Main Unit 1. Keep the unit plugged into a GROUNDED outlet at all times during operation. 2. Keep the unit and all components free from dirt, debris, and liquid at all times. 3. Make sure the power cord is plugged in correctly and safely off the floor to prevent accidents.
Nozzle Tip Maintenance Clean-up: Regularly cleaning the desolder tip on the supplied sponge (dampen before use) will help keep oxidation and flux off of your desoldering tip. Flux is a corrosive substance. When Not In Use Make sure to set your Sleep Timer in the steps above. Keeping your desoldering iron at set temperature when not in use negatively impacts heating element life.
Cleaning the Filter Tube 1. Turn off the power to the unit and allow the desoldering gun to cool prior to removing the filter. a. Press grip assembly release button (see diagram below) b. Grip assembly will slide back (see diagram below) c.
All X-Tronic Products come with 3-Year Guarantee, valid only in the 48 Contiguous United States. If you purchase this product and ship it to a destination outside of the 48 Contiguous United States this warranty ...
Compliments please call or email us. Toll Free: 844-861-4762 Info@XTronicUSA.com Our Business Hours are: Monday - Thursday: 8am - 4pm CST Friday: 8am - Noon CST If you would like to shop for other X-Tronic International Products Please visit our website www.XTronicUSA.com...