Tools And Equipment; Unpacking The Router - Cisco 12016 Unpacking Instructions Manual

Tools and Equipment

Tools and Equipment

Unpacking the Router

Opening and Disassembling the Shipping Package
Step 1
Cisco 12016, Cisco 12416, and Cisco 12816 Router Unpacking Instructions
8
You need the following tools and equipment to unpack the router:
• A knife or scissors (to cut the packaging straps on the shipping container)
9/16-inch (14-mm) wrench (for chassis hold-down bolts and pallet hold-down
•
bracket bolts)
3/4-inch (19-mm) socket and ratchet wrench
•
• Wire cutters
• Safety hand truck with retractable safety leg wheels and security strap, such
as the Stevens Appliance Truck Company "Escort," Model STEV SRT-M-66
(distributed by McMaster-Carr as Model 2654T6), or an equivalent safety
hand truck.
Unpack the router in two phases:
Open and disassemble the shipping package to expose the router on the
•
shipping pallet
Remove the router and scissor-jack platform from the shipping pallet
•
These two procedures are described next.
To expose the router on the shipping pallet, use
and follow these steps:
Use a pallet jack or forklift to place the shipping container as close to the
installation location as possible. The unpacking site should be a large, open space
with a level, solid floor. The work space must be large enough to allow easy access
to all four sides of the shipping container.
Figure 1 on page 3 as a reference
78-16081-02