Cisco 12016 Unpacking Instructions Manual page 5

System Unpacking Overview
The shipping pallet consists of a U-shaped wood and foam pallet body and a wood
and foam pallet front bar (Figure 2). The pallet front bar fastens to the open end
of the pallet body to create the fourth bearing surface for the scissor-jack platform
and to complete the base needed to support the walls of the shipping container.
Figure 2 Router Shipping Pallet Assembly
Pallet body
Pallet front bar
Top view of pallet parts
When the router and scissor-jack platform are installed on the pallet, the router
and scissor-jack platform are suspended over the well formed by the pallet body
and pallet front bar. By removing the front hold-down brackets from the pallet and
scissor-jack platform, you can remove the pallet front bar and expand the
scissor-jack platform to lower the platform base so that it supports the weight of
the router. After the bolts in the remaining hold-down brackets are removed from
the pallet, the router and scissor-jack platform can be separated from the pallet by
pulling the pallet body away from the scissor-jack platform.
Cisco 12016, Cisco 12416, and Cisco 12816 Router Unpacking Instructions
5
78-16081-02